Motorola WiNG 4.4 Page 420 Reference Manual Download

Page: 420 / 598

6 - 68 WiNG 4.4 Switch System Reference Guide

4. Highlight an existing policy and click the

Edit

button to revise the policy’s existing sequence number, encryption

scheme, hash value, authentication scheme, SA lifetime and DH group.

5. Select an existing policy and click the

Delete

button to remove it from the table.

6. If the properties of an existing policy are no longer relevant and cannot be edited to be useful, click the

Add

button to

define a new policy.

a. Configure a set of attributes for the new IKE policy:

NOTE:

192-bit AES and 256-bit AES are not supported for manual IPSec sa

configurations.

Sequence Number

Define the sequence number for the IKE policy. The available range is from 1 to 10,000 with 1
being the highest priority value.

Encryption

Set the encryption method used to protect the data transmitted between peers. Options include:

•

DES 56-bit DES-CBC

. The default value.

•

3DES

- 168-bit Triple DES.

•

AES

- 128-bit AES.

•

AES 192

- 192-bit AES.

•

AES 256

- 256-bit AES.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands