Motorola WiNG 4.4, Reference Manual

Page: 450 / 598

6 - 98 WiNG 4.4 Switch System Reference Guide
6. Click the Apply button to save the changes made to within the screen.
7. Click the Revert button to cancel any changes made within the screen and revert back to the last saved configuration.
6.8.5 Configuring Radius Users
Refer to the Users tab to view the current set of users and groups assigned for the Radius server. The Users tab is
employed when Local is selected as the Auth Data Source within the Authentication & Accounting tab.
To define the Radius user permissions for switch access:
1. Select Security > Radius Server from the main menu.
2. Select the Users tab.
3. Refer to the following to assess whether an existing user can be used with the local Radius server as is, requires
modification or if a new user is required.
4. Refer to the Available Groups field to view the memberships for existing users.
If the group assignment is insufficient, use the Edit or Add functions to modify/create users or modify their existing
group assignments. For guest users, only the password is editable. For normal (non-guest) users, the password and
NOTE: The same configuration is supported for the Secondary LDAP agent of the
Secondary LDAP server also.
User ID Displays the username for this specific user. The name assigned should reflect the user’s identity
and perhaps their status within the switch managed network (guest versus secure user).
Guest User Displays whether a specific user has been defined as a guest user (with a green check) or has
been configured as permanent user. Guest users have temporary access.
Start Date Defines the time when Guest User’s privileges commence.
Expiry Date If the user has been assigned guest privileges, they were also assigned a date when their Radius
privileges expire.