manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 33 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 33

Overview 1 - 17

• You can now configure a set of allowed VLANs on a trunk port. Packets received on this port that belong to other VLANs 

are discarded.

1.2.3.5 Interface Management 

The switch’s physical interfaces auto-negotiate speed and duplex. The switch also allows:

• Manual bandwidth configuration of a physical interface speed to 10/100/1000Mbps. 

• Manual duplex configuration of a physical interface to Full Duplex or Half Duplex. 

• Manual configuration of administrative shutdown of a physical interface.

1.2.4

 

Management Features 

The switch supports the following management features:

• A secure, browser-based management console

• A 

Command Line Interface

 (CLI) accessible via the serial port or through Telnet or a 

Secure Shell

 (SSH) application

• A CLI Service mode enabling the capture of system status information that can be sent to Motorola Solutions personnel 

for use in problem resolution

• The support for 

Simple Network Management Protocol 

(SNMP) version 3 as well as SNMP version 2

• Upload and download of Access Port firmware and configuration files using TFTP and FTP.

• Transfer of firmware and configuration files using Compact Flash (RFS7000 only) or USB (RFS6000 and RFS7000 

platforms only)

• The graphing of wireless statistics

• A GUI dashboard summary of system status

• Multi switch management via MSP application

• Heat map support for RF deployment

• Secure guest access with specific permission intervals

• Switch discovery enabling users to discover each Motorola Solutions switch on the specified network.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments