Motorola WiNG 4.4, Reference Manual

Page: 263 / 598

Network Setup 4 - 159
3. Select an Id and click the Edit button to revise the selected MSTP port configuration.
4.10.3.1 Editing a MSTP Port Configuration
To edit and reconfigure MSTP Port parameters.
1. Select a row from the port table and click the Edit button.
The following MSTP Port parameters can be reconfigured.
Port Index Displays the read-only Port Index.
Admin MAC Enable Displays the status of the Admin MAC Enable. A green check mark indicates the status as
enabled.
Port auto Edge Select the checkbox to use the port as an edge port.
Port Guard Root Select this checkbox to enable guard root for this port. Typically, each guard root port is a
designated port, unless two or more ports (within the root bridge) are connected together. If the
bridge receives superior (BPDUs) on a guard root-enabled port, the guard root moves the port to
a root-inconsistent STP state. This state is equivalent to a listening state. No data is forwarded
across the port. Thus, the guard root enforces the root bridge position.
PortFast BPDU Filter Enable this option to change the status of the Port Fast BPDU Filter .
Port FastBPDU Guard Enable this option to change the status of the Port Fast BPDU Guard.
Port Version Select a value to reconfigure the port version.