manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 101 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 101

Switch Information 3 - 43

3. Refer to the 

Alarm Details 

and 

Alarm Message 

for the following information: 

4. Click 

Close 

to

 

exit the dialog.

Description

Displays the details of the alarm log event. This information can be used in conjunction with the 

Solution

 

and 

Possible Causes

 items to troubleshoot the event and determine how the event can be avoided in 

future.

Solution

Displays a possible solution to the alarm event. The solution should be attempted first to rectify the 
described problem.

Possible Causes 

Describes the probable causes that could have raised this specific alarm. Determine whether the causes 
listed can be remedied to avoid this alarm from being raised in future.

Alarm Message

Displays the radio (and MAC address if relevant) reporting the alarm detail information.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments