manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 513 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 513

Diagnostics

8 - 7

2. Select the 

Other Resources

 

tab.

Keep the Cache allocation in line with cache expectations required within the switch managed network.

3. Define the maximum limit for each resource accordingly as you expect these resources to be utilized within the switch 

managed network.

4. Click the 

Apply

 button to commit and apply any changes to any of the resources maximum limit.

5. Click the 

Revert

 button to revert back to the last saved configuration

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments