manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 456 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 456

6 - 104 WiNG 4.4 Switch System Reference Guide

2. Select the 

Accounting Logs

 

tab. 

3. Refer to the following information as displayed within the 

Accounting Logs

 tab. 

Filename

Displays the name of each accounting log file. Use this information to differentiate files with 
similar attributes.

Type

Displays the type of file each file is.

Size

Display the size of the file.

NOTE: 

An explicit purge operation is not supported, the accounting logs are purged 

automatically once they reach their limit.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments