manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 221 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 221

Network Setup 4 - 117

2. Click the 

Smart RF 

tab.

3. The following 

Smart RF

 details are displayed:

MAC Address

Displays the Media Access Control (MAC) Address of each of the APs in the table.

Index

Displays the numerical identifier assigned to each detector AP used in Smart RF calibration.

AP Name

Displays the names assigned to each of the APs. The AP name can be configured on the 
Access Port Radios Configuration page.

Type

Displays the radio type of the corresponding APs. 

Available types are:

• 802.11a

• 802.11an

• 802.11b

• 802.11bg

• 802.11bgn

Antenna Gain (dBi)

Displays the current antenna gain value in dBi for each Access Port.

Coverage Rate 
(Mbps)

Displays the current coverage rate for each Access Port based on the Smart RF settings.

Is Detector

Displays whether or not an Access Port is a detector or not.Detector status is determined 
through Smart RF based on coverage and location of other APs in the network.

Lock Detector

Displays whether or not each Access Port is locked in detector status.

Lock Channel

Displays whether or not each Access Port is locked to a specific channel.

Lock Power

Displays whether or not each Access Port is locked to a specific power level.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments