manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 69 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 69

Switch Information 3 - 11

3.1.4 Viewing Switch Statistics

The 

Switch Statistics

 tab displays an overview of the recent network traffic and RF status for the switch. 

To display the Switch Statistics tab:

1. Select 

Switch

 from the main menu tree.

2. Click the 

Switch Statistics

 tab at the top of the Switch screen.

3. Refer to the 

Switch Statistics

 field for the following read-only information about associated MUs: 

4. Refer to the 

Traffic

 field to assess network traffic for associated APs and radios: 

Number of MUs 
Associated

Displays the total number of MUs currently associated to the switch.

Number of APs 
Adopted

Displays the total number of Access Ports currently adopted by the switch. 

Number of Radios 
Adopted

Displays the total number of radios currently adopted by the switch. 

Pkts per second

Displays the packet transmission rate for received and transmitted packets over last 30 seconds 
and 1 hour.

Throughput

Displays the traffic throughput for packets received, packets transmitted, and total packets over 
last 30 seconds and 1 hour.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments