Motorola WiNG 4.4, Reference Manual, Page: 205 / 598

Network Setup 4 - 101
as a supported rate. The basic default rates for an 802.11a radio differ from those 802.11b default rates, as an 802.11a
radio can support a maximum data rate of 54Mbps, while an 802.11b radio can support a maximum data rate of
11Mbps.
4. Click the Clear all rates button to uncheck all of the Basic and Supported rates.
5. Refer to the Status field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel to close the dialog without committing updates to the running configuration.
4.7.1.4 Adding APs
The Add Radio screen provides a facility for creating a new (unique) radio index for inclusion within the Configuration
screen. Use the Add screen to add the new radio’s MAC address and define its radio type.
To add a Radio to the switch:
1. Select Network > Access Port Radios from the main menu.
2. Click the Configuration tab.
NOTE: For AP 7131, AP 7181, and AP 650 the Rate Settings screen contains MCS data rates in addition
to the basic rates. You can select the Enable Short Guard Interval option in the 11n Modulation
Coding Schemes (MCS) section to increase the data rates. Checking the Enable Basic MCS0-7 option
will allow only 11n capable clients to get connected to this radio.