manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 270

4 - 166 WiNG 4.4 Switch System Reference Guide

4.12 Wired Hotspot

Hotspot functionality allows service providers or shop owners to provide Internet access to guest users. Hotspots are often 
found at restaurants, train stations, airports, libraries, coffee shops, book stores, fuel stations, and other public places. 
Users will not have Internet access until they are authenticated.When a user tries to access a web page through a browser, 
the request is redirected to a login page where the user has to enter a valid login name and password. Upon successful 
authentication, the user is provided with full Internet access until the session expires. Wired hotspots can be used where 
wireless connections are not used or not feasible.

4.12.1 Wired Hotspot Configuration

Use the

 

Network

 > 

Wired

 

Hotspot

 screen to configure the wired hotspot. To configure the wired hotspot:

1. Select 

Network

 > 

Wired Hotspot

 from the main menu tree.

2. Select the 

Configuration

 tab.

The 

Configuration

 tab displays the following information:

NOTE: 

The L2 firewall should be enabled for the Wired Hotspot feature to work. The L3 

entity table, which is used to get the MAC address is updated when the L2 firewall is 
updated.

NOTE: 

At any point of time hotspot can be enabled on 32 VLANs only.

Vlan Index

Enter a Vlan index between 1 and 4094. 

Enable

Click the 

Enable

 button to enable a hotspot.

Vlan Index

The Vlan index on which the hotspot is enabled.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands