manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 163 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 163

Network Setup 4 - 59

2. Click the 

Statistics

 tab.

3. Refer to the following details displayed within the table:

Last 30s

Click the 

Last 30s 

radio button to display statistics for the WLAN over the last 30 seconds. 

This option is helpful when troubleshooting issues as they actually occur.

Last Hr

Click the 

Last Hr

 radio button to displays statistics for the WLAN over the last 1 hour. This 

metric is helpful in baselining events over a one hour interval.

Index

The Idx (or index) is a numerical identifier used to differentiate the WLAN from other WLANs 
that may have similar characteristics.

ESSID

The SSID is the 

Service Set ID

 (SSID) for the selected WLAN.

Descr

The Descr item contains a brief description of the WLAN. Use the description (along with the 
index) to differentiate the WLAN from others with similar attributes.

VLAN 

The VLAN parameter displays the name of the VLAN the WLAN is associated with.

MUs

Lists the number of MUs associated with the WLAN.

Throughput Mbps

Throughput Mbps is the average throughput in Mbps on the selected WLAN. The Rx value is 
the average throughput in Mbps for packets received on the selected WLAN. The Tx value is 
the average throughput for packets sent on the selected WLAN.

Avg BPS

Displays the average bit speed in Mbps for the selected WLAN. This includes all packets sent 
and received.

% Non-UNI

Displays the percentage of the total packets for the selected WLAN that are non-unicast 
packets. Non-unicast packets include broadcast and multicast packets.

Retries

Displays the average number of retries for all MUs associated with the selected WLAN.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments