manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 175 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 175

Network Setup 4 - 71

9. Click 

Cancel

 to close the dialog without committing updates to the running configuration.

4.5.4.3 Mapping Include List Items to WLANs

To assign include list items to one or more WLANs:

1. Select 

Network

 > 

Wireless LANs

 from the main menu tree.

2. Select the 

NAC Include 

tab to view NAC Included devices.

3. Select an item from the Include List’s 

List Name 

field and click the 

Edit 

button (within the 

Configured WLANs

 field). 

4. Map the selected list item with as many WLANs as needed (be selecting the WLAN’s checkbox). Use the 

Select All 

button to associate each WLAN with the selected list item.

5. To remove the WLAN Mappings, select the 

Deselect All 

button to clear the mappings.

6. Refer to the 

Status

 field for a display of the current state of the requests made from the applet. Requests are any “SET/

GET” operation from the applet. The 

Status

 field displays error messages if something goes wrong in the transaction 

between the applet and the switch.

7. Click 

OK

 to save and add the new configuration and close the dialog window.

8. Click 

Cancel 

to close the dialog without committing updates to the running configuration.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments