Motorola WiNG 4.4, Reference Manual

Page: 227 / 598

Network Setup 4 - 123
3. Click the Smart RF Settings button
4. Click the Check All Boxes option in the Smart RF Global Settings dialogue to check every box in the configuration
window. To uncheck all boxes, click this box a second time.
5. Check the Enable Smart RF Module box to enable Smart RF functions on the switch.
The remainder of the Smart RF Settings screen is divided into the following four sections:
• Calibration Configuration
• Monitoring/Recovery Configuration
• Diagnostic Configuration
• Calibration Schedule
6. The Calibration Configuration section contains the following RF calibration settings:
Assign - Detector Check this box to enable automatic assignment of radio detectors.
Assign - Channel Check this box to enable automatic assignment of channels to working radios to avoid
channel overlap and avoid interference from external RF sources.
Assign - Tx Power Check this box to enable automatic assignment of transmit power.
Assign - Rescuers Check this box to enable automatic assignment of rescuers along with rescuing power.
Available The Available box lists all available channels for Smart RF.
Configured The Configured box lists all channels enabled for Smart RF.
Add To add a channel to the configured list, select one or more channels from the Available box
and click the
Add button.
Remove To remove a channel from the configured list, select one or more channels from the Available
box and click the Remove button.