Motorola WiNG 4.4 Page 379 Reference Manual Download

Page: 379 / 598

Switch Security 6 - 27

5. Refer to the

Status

field for the state of the requests made from applet. This field displays error messages if something

goes wrong in the transaction between the applet and the switch.

6. Click

to use the changes to the running configuration and close the dialog.

7. Click

Cancel

to close the dialog without committing updates to the running configuration.

6.4.6 Attaching Adaptive AP LANs

Use the Attach AAP LAN screen to view and assign the ACL to a physical interface or VLAN on the switch.

To display the AAP LANs page:

1. Select

Security

Wireless Firewall

from the main menu tree.

2. Click on the

Security Policy

tab.

3. Click on the

Wireless Filters

tab.

4. The

Attach AAP LAN

tab contains the following read-only information:

5. Select an interface and click on

Edit

to modify the LAN Index, IP ACL and MAC ACL values. For more information

see,

Editing an Adaptive AP LAN on page 6-27

6.4.6.1 Editing an Adaptive AP LAN

To Edit an AAP LANs page:

AP MAC Address

Displays the MAC Address of all Adaptive APs.

LAN Index

The LAN Index displays the list of attached Adaptive AP LANs with ACLs. The maximum value is
2, of them each one for inbound and outbound.

ACL ID: Inbound

Displays the Inbound ACL ID for each attached Adaptive AP. ACL IDs can be modified in the

Edit

screen. The default value is 1.

ACL ID: Outbound

Displays the Outbound ACL ID for each attached Adaptive AP. ACL IDs can be modified in the Edit
screen.The default value is 1.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands