Motorola WiNG 4.4 Page 190 Reference Manual Download

Page: 190 / 598

4 - 86 WiNG 4.4 Switch System Reference Guide

9. Click

Cancel

to close the dialog without committing updates to the running configuration.

4.6.3.2 View a MU Statistics Graph

The

MU Statistics

tab has an option for displaying detailed MU statistics for individual MUs in a graphical format. This

information can be used for comparison purposes to chart MU and overall switch performance.

To view the MU Statistics in a graphical format:

1. Select a

Network

Mobile Units

from the main menu tree.

2. Click the

Statistics

tab.

3. Select a MU from the table displayed in the

Statistics

screen and click the

Graph

button.

4. Select a checkbox to display that metric charted within the graph. Do not select more than four checkboxes at any one

time.

5. Refer to the

Status

field for the current state of the requests made from applet. This field displays error messages if

something goes wrong in the transaction between the applet and the switch.

6. Click

Close

to close the dialog without committing updates to the running configuration. Voice Statistics tab is not

mentioned.

4.6.4 Viewing MU Voice Statistics

To view MU Voice Statistics details:

1. Select

Network

Mobile Units

from the main menu tree.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands