Motorola WiNG 4.4, Reference Manual

Page: 356 / 598

6 - 4 WiNG 4.4 Switch System Reference Guide
6.2 Access Point Detection
Use the Access Point Detection menu options to view and configure the detection of other Access Points. The Access
Point Detection screen consists of the following tabs:
• Enabling and Configuring AP Detection
• Authorized / Ignored APs
• Unauthorized APs (AP Reported)
• Unauthorized APs (MU Reported)
• AP Containment
6.2.1 Enabling and Configuring AP Detection
Use the Configuration screen to allow the switch to detect potentially hostile Access Points, set the number of detected
APs allowed and define the timeout and threshold values used for detection. The switch can enable both Access Ports and
MUs to scan and detect Access Points within the switch managed network. Continually re-validating the credentials of
associated devices reduces the possibility of an Access Point hacking into the switch managed network.
To configure AP Detection:
1. Select Security > Access Point Detection from the main menu.
2. Select the Configuration tab.