manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 297 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 297

Switch Services 5 - 17

2. Select the 

Dynamic Bindings 

tab. 

3. Refer to the contents of the Dynamic Bindings tab for the following: 

4. Select an address from those displayed and click the 

Delete

 button to remove the client from the list displayed. The 

Delete button is enabled only when one or more rows are selected for deletion.

5. Click on 

Delete All Automatic Leases 

button to delete all the automatic leased DHCP connections. This button is 

enabled when one or more rows exist.

6. Click the 

Export 

button to display a screen used to export the DHCP Binding information to a secure location.

IP Address

Displays the IP address for each client whose MAC Address is listed in the MAC 
Address / Client ID column. This column is read-only and cannot be modified.

MAC Address / 
Client ID

Displays the MAC address (client hardware ID) of the client using the switch’s 
DHCP Server to access switch resources. The MAC address is read-only and cannot 
be modified.

Expiration

Displays the expiration of the lease used by the client for switch DHCP resources. 
This column is read-only and cannot be modified.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments