Motorola WiNG 4.4, Reference Manual, Page: 302 / 598

5 - 22 WiNG 4.4 Switch System Reference Guide
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.
5.2.9.2 Adding a New DHCP Pool Class
The Add DHCP Pool Class Configuration dialog is used to associate an existing class, created using Adding a New
DHCP User Class , to an existing pool, created using Adding a New DHCP Pool . It is also used to configure a maximum of
4 pool class address range. To add a new DHCP pool class:
1. Select Services > DHCP Server from the main menu tree.
2. Select the Pool Class tab.
3. Click on the Add button from the Pool Class Names section.
4. Use the Pool Name field to define a new pool name. Enter the pool name created using Adding a New DHCP Pool on
page 5-7 .
5. Use the Class Name field to associate an existing class, created using Adding a New DHCP User Class on page 5-18 .
6. The Pool Class Address Range field is used to assign address range to the class inside the pool. A maximum of 4
address ranges can be assigned to a class.
a. Use the Insert button to enter the Start IP and End IP address range for a class.
b. Select a address range and click Remove to delete that particular address range.
7. Refer to the Status field. It displays the current state of the requests made from the applet. Requests are any “SET/
GET” operation from the applet. The Status field displays error messages if something goes wrong in the transaction
between the applet and the switch.
8. Click OK to save the new configuration and close the dialog window.
9. Click Cancel to close the dialog without committing updates to the running configuration.