Motorola WiNG 4.4, Reference Manual, Page: 136 / 598

4 - 32 WiNG 4.4 Switch System Reference Guide
10.Refer to the Status field for the current state of the requests made from applet. This field displays error messages if
something goes wrong in the transaction between the applet and the switch.
11.Click on the Radius... button (when Radius is selected as the accounting mode) to configure an external or internal
primary and secondary Radius and NAC server. For more information, see Configuring External Radius Server Support
on page 4-47 .
12.Select the Syslog button (when Syslog is selected as the accounting mode) to view switch syslog accounting details.
To enable syslog, select the Syslog option from the Accounting Mode drop-down menu. Use this sub screen to
provide the Syslog Server IP address and port for the Syslog Server performing the accounting function.
13.Click OK to use the changes to the running configuration and close the dialog.
14.Click Cancel to close the dialog without committing updates to the running configuration.
4.5.1.2 Assigning Multiple VLANs per WLAN
The switch allows the mapping of a WLAN to more than one VLAN. When an MU associates with a WLAN, it is assigned
a VLAN in such a way that users are load balanced across VLANs. The VLAN is assigned from the pool representative of
the WLAN. The switch tracks the number of MUs per VLAN, and assigns the least used/loaded VLAN to the MU. This
number is tracked on a per-WLAN basis.
To assign multiple VLANs to a WLAN:
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed within the Configuration tab and click the Edit button.
A WLAN screen displays with the WLAN’s existing configuration.
3. Select the VLAN radio button from the Configuration screen to change the VLAN designation for this WLAN.
By default, all WLANs are initially assigned to VLAN 1.
4. Select the Dynamic Assignment checkbox for a user-based VLAN assignment with Radius for this WLAN.
5. Select the Assign Multiple VLAN(s) button to map a WLAN to more than one VLAN. This displays the Multiple VLAN
Mapping screen.
MCast Addr 2 The second address also takes packets (where the first 4 bytes match the first 4 bytes of the
mask) and sends them immediately over the air instead of waiting for the DTIM period. Any
multicast/broadcast that does not match this mask will go out only on DTIM Intervals.
NAC Mode
Using Network Access Control (NAC), the switch only grants access to specific network resources. NAC
restricts access to only compliant and validated devices (printers, phones, PDAs, etc.), thereby limiting
the risk of emerging security risks. NAC performs an authorization check for users and MUs without a
NAC agent, and verifies an MU’s compliance with the network security policy. The switch supports only
the EAP/802.1x type of NAC. However, the switch can bypass NAC for MUs without NAC 802.1x
support. For the implications of using the include and exclude with NAC, see
Configuring the NAC
Inclusion List on page 4-68 , Configuring the NAC Exclusion List on page 4-72 and
Configuring NAC
Server Support on page 4-50 .