Motorola WiNG 4.4, Reference Manual

Page: 396 / 598

6 - 44 WiNG 4.4 Switch System Reference Guide
5. To enable a Denial of Service Attack filter, select a disabled rule from the table and click the Enable button.The Check
Enabled field will show a green checkmark next to the Denial of Service Attack filters that are enabled on the switch
firewall.
6. To disable a Denial of Service Attack filter, select an enabled rule from the table and click the Disable button. When
a DoS Attack filter is disabled a red “X” will be shown in the Check Enabled column.
7. To enable all Denial of Service Attack filters, click on the Enable All button.The Check Enabled field will show a
green checkmark next to the Denial of Service Attack filters that are enabled on the switch firewall.
8. To disable all Denial of Service Attack filters, click on the Disable All button. When a DoS Attack filter is disabled a
red “X” will be shown in the Check Enabled column.
9. To clear statistics for Denial of Service Attacks, click the Clear Stats button. This will reset all Attack Counts to 0
and all Last Occurrence times to 0:00:00.00.
10.Click the Apply button to save the changes made within the DoS Attach screen.
11.Click the Revert button to cancel any changes made within the DoS Attach screen and revert back to the last saved
configuration.
6.4.15 Configuring the Role
To view configured roles:
1. Select Security > Wireless Firewall from the main tree menu.
2. Click the Configuration tab.
NOTE: Of the 28 DoS Attack filters supported by the switch, 10 can be disabled
individually. Those filters are:
• Smurf
• Twinge
• Invalid IP protocol
• ICMP router advertisement
• Src ip route
• Echo ports
• Snork
• FTP bounce
• TCP intercept
•
Bcast Mcast ICMP