Motorola WiNG 4.4 Page 377 Reference Manual Download

Page: 377 / 598

Switch Security 6 - 25

4. The

Attach AAP WLAN

tab contains the following read-only information:

5. Select an interface and click on

Edit

to modify the WLAN Index, IP ACL and MAC ACL values. For more information

see,

Editing an Adaptive AP WLAN on page 6-25

6. Select an interface and click the

Delete

button to delete the interface configuration from the switch.

7. Click on

Add

button to add an physical or VLAN interface to the switch. For more information, see

Adding an Adaptive

AP WLAN on page 6-26

6.4.5.1 Editing an Adaptive AP WLAN

To Edit an AAP WLANs page:

1. Select

Security

Wireless Firewall

from the main menu tree.

2. Click on the

Security Policy

tab.

3. Click on the

Wireless Filters

tab.

WLAN Index

The WLAN Index displays the list of attached WLANs with ACLs.

IP ACL

Displays the IP ACL configured for the WLAN interface in the inbound/outbound direction.

MAC ACL

Displays the MAC ACL configured for the WLAN interface in the inbound/outbound direction.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands