Motorola WiNG 4.4, Reference Manual

Page: 155 / 598

Network Setup 4 - 51
The switch supports only EAP/802.1x NAC. However, the switch provides a mean to bypass NAC authentication for MUs
without NAC 802.1x support (printers, phones, PDAs, etc.).
For a NAC configuration example using the switch CLI, see Configuring the NAC Inclusion List on page 4-68 or
Configuring the NAC Exclusion List on page 4-72 .
• None – NAC disabled, no NAC is conducted. An MU can only be authenticated by a Radius server.
• Do NAC except exclude list – An MU NAC check is conducted except for those in the exclude-list. Devices in the
exclude-list will not have any NAC checks.
• Bypass NAC except include list – An MU NAC check is conducted only for those MUs in the
include-list.
To configure NAC Server support:
1. Select Network > Wireless LANs from the main menu tree.
2. Select an existing WLAN from those displayed with the Configuration tab.
3. Click on the Edit button.
4. Select either the EAP 802.1x , Hotspot, or Dynamic MAC ACL button from within the Authentication field.
This enables the Radius button at the bottom of the Network > Wireless LANs > Edit screen.
5. Click the Radius button.
The Radius Configuration screen displays (with the Radius tab displayed by default) for defining an external Radius
or NAC Server.
6. .Select the NAC tab to configure NAC support.