Motorola WiNG 4.4 Page 229 Reference Manual Download

Page: 229 / 598

Network Setup 4 - 125

11.Click the

Calibration Status

button to open a dialogue with the following calibration status information:

12.Click

to use the changes to the running configuration and close the dialog.

13.Click

Cancel

to close the dialog without committing updates to the running configuration.

4.7.10 Voice Statistics

To view Voice Statistics:

1. Select

Network

Access Port Radios

from the main menu tree.

Last Calibration
Start Time

Displays the date and time that the last Smart RF calibration began.

Last Calibration
End Time

Displays the date and time that the last Smart RF calibration ended.

Next Calibration
Start Time

Displays the date and time scheduled for the next Smart RF calibration.

Current Action

Displays what the Smart RF engine is currently doing. If there is a scan in process, it will be
displayed here.

Master Switch IP

Displays the IP address of the master switch in the cluster.

Is Cluster Master

Displays the cluster master status of the switch. If the switch is the master, it will display

true

, otherwise it will display

false

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands