manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 394 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 394

6 - 42 WiNG 4.4 Switch System Reference Guide

5. To create a new WLAN Firewall rule configure the following information:

6. Refer to the 

Status

 field for the state of the requests made from applet. This field displays error messages if something 

goes wrong in the transaction between the applet and the switch.

7. Click 

OK

 to use the changes to the running configuration and close the dialog.

8. Click 

Cancel

 to close the dialog without committing updates to the running configuration.

6.4.14 Configuring Denial of Service (DoS) Attack Firewall Rules

To review Denial of Service Attack firewall rules:

1. Select 

Security 

>

 

Wireless Firewall

 from the main tree menu.

2. Click the 

Configuration

 tab.

3. Click the 

DoS Attack 

tab.

WLAN Index

Select a WLAN index number from the pull-down menu. This number is configured on the wireless 
LAN configuration page.

Broadcast Storm 
Threshold

Enter the Broadcast Storm Threshold for each interface. When the rate of broadcast packets 
exceeds the high threshold configured for an interface, packets are throttled till the rate falls 
below the configured rate. Thresholds are configured in terms of packets per second. The valid 
threshold range is 0-1000000 packets per second.

Multicast Storm 
Threshold

Enter the Multicast Storm Threshold for each interface. When the rate of multicast packets 
exceeds the high threshold configured for an interface, packets are throttled till the rate falls 
below the configured rate. Thresholds are configured in terms of packets per second. The valid 
threshold range is 0-1000000 packets per second.

Unknown Unicast 
Storm

Enter the Unknown Unicast Storm Threshold for each interface. When the rate of unknown unicast 
packets exceeds the high threshold configured for an interface, packets are throttled till the rate 
falls below the configured rate. Thresholds are configured in terms of packets per second. The 
threshold range is 0-1000000 packets per second.

Allowed MU 
denies per sec

Configure the permissible number of denied packets per second that a mobile unit on this WLAN 
may send before it is deauthenticated. The threshold range is 0-1000000 packets per second.

MU 
Deauthenticate

Configure whether or not mobile unit de-authenticated is enabled for each WLAN. If

 MU 

Deauthenticate 

is enabled any associated mobile unit which hit the thresholds configured for 

storm traffic will be deauthenticated. To enable de-authenticated, check the box.

DHCP Trust

Select to enable DHCP trust on this WLAN. When disabled, any DHCP packets received on the 
interface is dropped.

ARP Trust

Select to enable ARP trust on this WLAN. ARP packets received on this interface are considered 
trusted and information from these packets is used to identify rogue devices.

ARP Rate

Enter the Address Resolution Protocol (ARP) threshold.The ARP threshold determines the number 
of ARP packets permissible per second. Rates can be between 0 and 1000000

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments