Motorola WiNG 4.4 Page 16 Reference Manual Download

Page: 16 / 598

1 - viii WiNG 4.4 Switch System Reference Guide

Document Conventions

The following conventions are used in this document to draw your attention to important information:

Notational Conventions

The following

additional notational conventions are used in this document:

•

Italics

are used to highlight the following:

• Chapters and sections in this and related documents

• Dialog box, window and screen names

• Drop-down list and list box names

• Check box and radio button names

• Icons on a screen

•

GUI

text is used to highlight the following:

• Screen names

• Menu items

• Button names on a screen

• bullets (•) indicate:

• Action items

• Lists of alternatives

• Lists of required steps that are not necessarily sequential

• Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.

NOTE:

Indicate tips or special requirements.

Switch Note:

Indicates caveats unique to a RFS4000, RFS6000 or RFS7000 model switch.

CAUTION:

Indicates conditions that can cause equipment damage or data loss.

WARNING!

Indicates a condition or procedure that could result in personal injury or

equipment damage.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands