Motorola WiNG 4.4, Reference Manual

Page: 346 / 598

5 - 66 WiNG 4.4 Switch System Reference Guide
5. The AP Information section displays the following information about APs:
6. Click the Apply button to save the changes made within this screen. Clicking Apply overwrites the previous
configuration.
7. Click the Revert button to disregard any changes made within this screen and revert back to the last saved
configuration.
5.8.3.1 Adding AP Location Information
1. To add AP Location information for your site: Select Services > RTLS from the main menu tree.
2. Select the Site tab.
3. Click the Add button.
5.8.4 Configuring SOLE Parameters
To configure the switch’s internal SOLE locationing engine:
AP MAC Lists the MAC Addresses of all APs which have been configured for RTLS.
Location:
X Coordinate Displays the value of the X Coordinate for each AP. The X coordinate is relative to the origin point
of 0,0 in the upper left corner of the site map. This value is user configured and not detected by
the switch. For information on how to configure AP location information, see
Chapter 5, Adding
AP Location Information .
Location:
Y Coordinate Displays the value of the Y Coordinate for each AP. The Y coordinate is relative to the origin point
of 0,0 in the upper left corner of the site map. This value is user configured and not detected by
the switch. For information on how to configure AP location information, see
Chapter 5, Adding
AP Location Information .
Location:
Z Coordinate Displays the value of the Z Coordinate for each AP. The Z coordinate is the height of the AP relative
to the lowest point of the site. This value is user configured and not detected by the switch. For
information on how to configure AP location information, see
Chapter 5, Adding AP Location
Information .
Status Displays the status value for each AP.
Switch IP Displays the IP address of switch associated with each AP configured for RTLS.
11a Radio Displays the Index, MAC Address, Power and Channel information for the 802.11a radio on each
AP.
11b Radio Displays the Index, MAC Address, Power and Channel information for the 802.11b radio on each
AP.