Motorola WiNG 4.4, Reference Manual

Page: 431 / 598

Switch Security 6 - 79
5. If the Radius Server radio button is selected, the following server information displays within the Radius tab:
6. Select an existing Radius Server and click the Edit button to modify its designation as a primary or secondary Radius
Server, IP address, port, NAS ID and shared secret password.
Motorola Solutions recommends only modifying an existing Radius Server when its current configuration is no longer
viable for providing user authentication. Otherwise, define a new Radius Server.
7. Select an existing server and click the Delete button to remove it from list of available Radius Servers. Only delete a
server if its configuration does not provide a valid authentication medium.
8. If you require a new Radius Server be configured, click the Add button.
Set this server’s designation as a primary or secondary Radius Server (using the checkboxes), define the server IP
address, port and shared secret password. Click
OK when completed to save the changes.
9. If the User Table checkbox was selected from within the Configuration field, select the User Table tab to review the
User Name and Passwords defined for use.
10.Click the Add button to display a screen used to add a new User and Password. Enter a User Name and Password and
confirm. Click OK to save the changes.
11.To change an existing user’s password, select the user from within the User Table and click the Change Password
button. Change and confirm the updated password.
Type Displays whether this target server is a Primary or Secondary Radius Server.
Server IP Address Displays the IP address of the server acting as the data source for the Radius server.
Port Displays the TCP/IP port number for the server acting as a data source for the Radius. The default
port is 1812.
Shared Secret Displays a shared secret used for each host or subnet authenticating against the Radius server.
The shared secret can be up to 7 characters in length.