Motorola WiNG 4.4, Reference Manual, Page: 215 / 598

Network Setup 4 - 111
For information on revising the weight assigned to each radio in respect to its intended operation within its assigned
WLAN, see
Editing the WLAN Configuration on page 4-27 .
To view existing radio bandwidth weight settings:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Bandwidth tab.
Bandwidth information displays per radio with the following data:
4.7.6 Configuring Radio Groups for MU Load Balancing
In order to do MU load balancing, radios must be grouped. Usually, two radios with similar characteristics and
geographically close to each other can be grouped together.
By default, a radio is not in any group and the load balancing algorithm would not apply to it.
To configure a group of radios together:
1. Select Network > Access Port Radios from the main menu tree.
2. Go to the Configuration tab.
Index The Index is the numerical index (device identifier) used with the device radio. Use this index
(along with the radio name) to differentiate the radio from other device radios.
Description The displayed name is the name used with the device radio. Use this name (along with the
radio index) to differentiate the radio from other device radios.
QoS Weight Displays the Quality of Service weight for the AP. The default value for the weight is 1. AP
QoS will be applied based on the QoS weight value with the higher values given priority.