manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 127 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 127

Network Setup 4 - 23

2. Click the 

Configuration

 tab.

The 

Configuration

 tab displays the following details:

Switch

The 

Switch

 field displays the IP address of the cluster member associated with each 

WLAN. When clustering is enabled on the switch and 

Cluster GUI

 is enabled, the 

Switch

 field will be available on the Wireless LAN screen. For information on 

configuring enabling 

Cluster GUI

, see 

Managing Clustering Using the Web UI

.

Index

Displays the WLAN’s numerical identifier. The WLAN index range is from 1 to the 
maximum number of WLANs supported by the switch. (The WLAN numbers will depend 
on the device on which this feature is enabled). An index can be helpful to differentiate 
a WLAN from other WLANs with similar configurations.

Enabled

Refer to the Enabled parameter to discern whether the specified WLAN is enabled or 
disabled. When enabled, a green check mark displays. When disabled, a red "X" 
displays. To enable or disable a WLAN, select it from the table and click the 

Enable

 or 

Disable

 button.

ESSID

Displays the Service Set ID associated with each WLAN. Click the 

Edit

 button to modify 

the value to a new unique SSID.

Description

Displays a short description of the associated WLAN. Click the 

Edit

 button to modify the 

value the WLAN description.

VLAN(s)

Displays the name of the VLAN ID (s) of the VLAN(s) this WLAN is mapped to. The VLAN 
ID can be between 1 and 4094. The default mapping is to a single VLAN with VLAN ID 1.

Authentication

Displays the type of authentication used with the specified WLAN. Click the 

Edit

 button 

to modify the WLAN’s current authentication scheme. For information on configuring an 
authentication scheme for a WLAN, see 

Configuring Authentication Types on page 4-34

.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments