Motorola WiNG 4.4 Page 390 Reference Manual Download | Manualshive

Page: 390 / 598

background image

6 - 38 WiNG 4.4 Switch System Reference Guide

6.4.12.1 Adding Layer 2 Firewall Configurations

To configure new Layer 2 firewall rules:

1. Select

Security

>

Wireless Firewall

from the main tree menu.

2. Click the

Configuration

tab.

3. Click the

L2

tab.

4. Click the

Add

button.

5. Configure the following values for each new Layer 2 configuration:

Broadcast Storm
Threshold

Displays the Broadcast Storm Threshold for each interface. When the rate of broadcast packets
exceeds the high threshold configured for an interface, packets are throttled till the rate falls
below the configured rate. Thresholds are configured in terms of packets per second. The
threshold range is 1-1000000 packets per second.

Multicast Storm
Threshold

Displays the Multicast Storm Threshold for each interface. When the rate of multicast packets
exceeds the high threshold configured for an interface, packets are throttled till the rate falls
below the configured rate. Thresholds are configured in terms of packets per second. The
threshold range is 1-1000000 packets per second.

Unknown Unicast
Storm

Displays the Unknown Unicast Storm Threshold for each interface. When the rate of unknown
unicast packets exceeds the high threshold configured for an interface, packets are throttled till
the rate falls below the configured rate. Thresholds are configured in terms of packets per second.
The threshold range is 1-1000000 packets per second.

Interface Name

Assign the interface to be associated with the Layer 2 firewall. Available Layer 2 interfaces are
ge 1-8 and up1.

ARP Rate

Specify the Address Resolution Protocol (ARP) rate. Rates can be between 1 and 1000000.

DHCP Trust

Select to enable DHCP trust on this interface. A DHCP server must always be connected to an
interface that has its DHCP trust enabled.

ARP Trust

Select to enable ARP trust on this interface. ARP packets received on this interface are considered
trusted and information from these packets is used to identify rogue devices.

«
...
388
389
390
391
392
...
»

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 4.4

DGS-1224TP - Web Smart Switch

Brand: D-Link Pages: 52

Brand: D-Link Pages: 8

DES-3225G Series

Brand: D-Link Pages: 3

DES-1228 - Web Smart Switch

Brand: D-Link Pages: 69

Brand: D-Link Pages: 109

Brand: Barco Pages: 2

RMQ-Titan M30 Series

Brand: Eaton Pages: 4

Brand: V7 Pages: 35

Premasreg 716 Series

Brand: S+S Regeltechnik Pages: 32

Brand: NTI Pages: 15

Brand: Metrix Pages: 12

Brand: Ruby Tech Pages: 301

Brand: Maiwe Pages: 5

Brand: Zonet Pages: 7

Brand: Minicom Pages: 16

Brand: Pilz Pages: 20

Brand: Belkin Pages: 40

Brand: NTI Pages: 15

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands