Motorola WiNG 4.4 Page 330 Reference Manual Download

Page: 330 / 598

5 - 50 WiNG 4.4 Switch System Reference Guide

• Forward and reverse data paths for traffic originating from and destined to MUs that have roamed from one Layer 3

subnet to another are symmetric.

To configure Layer 3 Mobility for the switch:

1. Select

Services

Layer 3 Mobility

from the main menu tree.

The

Layer 3 Mobility

screen appears with the

Configuration

tab displayed.

2. Select the

Use Default Management Interface

checkbox to use the switch’s default management interface IP

address for MUs roaming amongst different Layer 3 subnets. The IP address displayed to the right of the checkbox is
used by Layer 3 MU traffic.

3. If wanting to use a local IP addresses (non switch management interface) for MUs roaming amongst different Layer 3

subnets, select the

Use this Local Address

checkbox and enter an IP address.

4. Use the

Roam Interval

to define maximum length of time MUs within selected WLAN are allowed to roam amongst

different subnets.

5. Refer to the table of WLANs and select the checkboxes of those WLANs you wish to enable Layer 3 mobility for.

Once the settings are applied, MUs within these WLANs can roam amongst different subnets.

6. Select the

Enable Mobility

checkbox to enable a MU to maintain the same Layer 3 address while roaming throughout

a multi-VLAN network.

7. Select the

All WLANs On

button to enable mobility for each WLAN listed.

If unsure if you want to enable mobility for each WLAN, manually select just those you want to enable.

8. Select the

All WLANs Off

button to disable mobility for each WLAN listed.

9. Click the

Apply

button to save the changes made within this screen. Clicking Apply overwrites the previous

configuration.

10.Click the

Revert

button to disregard any changes made within this screen and revert back to the last saved

configuration.

NOTE:

When using Layer 3 Mobility ensure that TCP traffic on port 58788 is allowed on

the network(s) where mobile units will be roaming from and to.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands