Motorola WiNG 4.4 Page 519 Reference Manual Download

Page: 519 / 598

Diagnostics 8 - 13

11.If Server has been selected as the source, use the

Password

parameter to enter the password required to send the

log file to the target location.

12.Specify the appropriate

Path

name to the target directory on the local system disk or server as configured using the

parameter. If the local disk is selected, a browse button is available.

13.Click the

Transfer

button when ready to move the target file to the specified location. Repeat the process as necessary

to move each desired log file to the specified location.

14.If a problem condition is discovered during the file transfer, click the

Abort

button to terminate the transfer.

15.Refer to the

Status

field for the current state of the requests made from applet. This field displays error messages if

something goes wrong in the transaction between the applet and the switch.

16.Click the

Close

button to exit the screen. No values need to be saved once the transfer has been made.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands