Motorola WiNG 4.4 Page 511 Reference Manual Download

Page: 511 / 598

Diagnostics

8 - 5

7. Click the

Revert b

utton to revert back to the last saved configuration.

8.1.4 Switch Disk Allocation

The

Disk

tab contains parameters related to the various disk partitions on the switch. It also displays available space in

the external drives (compact flash etc).

1. Select

Diagnostics

from the main tree menu.

2. Select the

Disk

tab.

3. This

Disk

tab displays the status of the switch flash, nvram, and system disk resources. Each field displays the

following:

• Free Space Limit

• Free INodes

• Free INode Limit

4. Define the

Free Space Limit

variable carefully, as disk space may be required during periods of high bandwidth traffic

and file transfers.

5. Click the

Apply

button to commit and apply the changes.

6. Click the

Revert

button to revert back to the last saved configuration.

8.1.5 Switch Memory Processes

The

Processes

tab displays the number of processes in use and percentage of memory usage limit per process.

1. Select

Diagnostics

from the main tree menu.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands