Motorola WiNG 4.4 Page 88 Reference Manual Download | Manualshive

Page: 88 / 598

background image

3 - 30 WiNG 4.4 Switch System Reference Guide

3.4 Viewing Switch Firmware Information

The switch can store (retain) two software versions (primary and secondary). Information supporting the two versions
displays within the

Firmware

screen. The

Version

column displays the version string. The

Build Time

is the date and

time each version was generated.

Install

represents the

date and time the upgrade was performed.

Next Boot

indicates

which version should be used on the next reboot. The Next Boot version should match the

Running Version

, unless the

system has failed over to another version.

To view the firmware files available to the switch:

1. Select

Switch

>

Firmware

from the main menu tree.

2. Refer to the following information displayed within the Firmware screen:

3. Refer to the

Patch

field for a listing of the patches available to the switch. The name and version of each patch file is

displayed. Each patch file has an associated .txt file designation. The text file describes nuances associated with the
file that may make it optimal for use with the switch.

Image

Displays whether a firmware image is the primary image or a secondary image. The primary image
is typically the image loaded when the switch boots.

Version

Displays a unique alphanumeric version for each firmware file listed.

Current Boot

A check mark within this column designates this version as the version used by the switch the last
time it was booted. An “

X”

in this column means this version was not used the last time the

switch was booted.

Next Boot

A check mark within this column designates this version as the version to be used the next time
the switch is booted. An

“X”

in this column means this version will not be used the next time the

switch is booted. To change the boot designation, highlight an image and click the

Edit

button.

Built Time

Displays the time the version was created (built). Do not confuse the Built Time with the time the
firmware was last loaded on the switch.

Install Time

The Install Time is the time this version was loaded with on the switch. Periodically review this
information to assess the relevance of older files.

«
...
86
87
88
89
90
...
»

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WiNG 4.4

Brand: Under Control Pages: 9

DES-3224 - Switch

Brand: D-Link Pages: 75

Brand: Eaton Pages: 40

Brand: N-Tron Pages: 132

Brand: Imtex-Controls Pages: 2

Brand: Kohler Pages: 170

Brand: 3onedata Pages: 4

Brand: Maiwe Pages: 5

Brand: hager Pages: 72

Brand: Pakedge Device & Software Pages: 14

Brand: Woxcon Pages: 51

SW-HDM3D-C5-8X8

Brand: Avenview Pages: 20

Brand: N-Tron Pages: 15

Brand: CoolGear Pages: 8

Brand: ZIEHL-ABEGG Pages: 12

Brand: SBC Pages: 28

EDS-2005-EL Series

Brand: Moxa Technologies Pages: 14

Brand: S&C Pages: 23

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands