Motorola WiNG 4.4 Page 254 Reference Manual Download

Page: 254 / 598

4 - 150 WiNG 4.4 Switch System Reference Guide

6. Click the

button to save the changes and return to the

AP Firmware

tab.

4.9.6.1 Editing an Existing AP Firmware Image

To modify the AP Firmware Image settings:

1. Select

Network Setup

Access Port

from the main menu tree.

2. Click the

AP Firmware

tab.

3. Select an

AP Image Type

from the

AP Image Upload

table.

4. Click the

Edit

button to display a screen to change the

AP Image Type

AP Image File

5. Modify the

AP Image Type

as necessary.

6. Modify the

AP Image File

as necessary. You can browse the switch file systems using the browser icon. AP images

must be on the flash, system, nvram, or usb file systems in order for them to be selected.

7. Click the

button to save the changes and return to the

AP Firmware

tab

4.9.6.2 Updating an existing AAP Image Firmware

Use the

Update AAP

Image

button to update a selected Adaptive AP image firmware. To update an AP image:

1. Select

Networks

Access Port

from the main menu tree.

2. Click the

AP Firmware

tab.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands