Motorola WiNG 4.4, Reference Manual

Page: 453 / 598

Switch Security 6 - 101
2. Select the Groups tab.
3. Refer to the user groups listed to review the following read-only attributes for each group:
4. Refer to the WLANs Assigned area of the Groups tab to review which switch WLANs are available for use with
configured groups.
Name Displays the unique name assigned to each group. The group name should be indicative of the
user population within and their shared activity within the switch managed network.
Guest Group Displays whether a specific group has been defined as a guest group (indicated with a green check mark)
or has been configured as permanent group (indicated with a red X). Guest users have temporary Radius
server access.
VLAN ID Display the VLAN ID(s) used by each group. The VLAN ID is representative of the shared SSID
each group member (user) employs to interoperate with one another within the switch managed
network (once authenticated by the local Radius server).
Time of Access
Start Displays the time each group is authenticated to interoperate within the switch managed network. Each
user within the group is authenticated with the local Radius server. Group members successfully
authenticated are allowed access to the switch managed network under the restrictions defined for that
group.
Time of Access End Displays the time each group’s user base will loose access privileges. After this time, users within
this group will not be authenticated by the local Radius server. However, if a user is part of a
different group that has not exceeded their access interval, then the user may still interoperate
with the switch (remain authenticated) as part of that group.