manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 217 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 217

Network Setup 4 - 113

2. Click the 

Group 

tab. 

Group information displays per radio with the following data: 

4.7.7 Viewing Active Calls (AC) Statistics

To view Active Calls statistics:

1. Select 

Network 

>

 Access Port Radios 

from the main menu tree.

Group Id

Displays the Group Id associated with each adopted radio.

Radio Configured 
Index

The Index is the numerical index (device identifier) used with the device radio. Use this index 
(along with the radio name) to differentiate the radio from other device radios.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments