Motorola WiNG 4.4, Reference Manual

Page: 135 / 598

Network Setup 4 - 31
9. Refer to the Advanced field for the following information:
Accounting Mode
If using a Syslog server to conduct accounting for the switch, select the Syslog option from the
Accounting Mode drop-down menu. Once selected, a Syslog Config button is enabled on the bottom
of the Network > Wireless LANs > Edit screen. Use this sub screen to provide the Syslog Server IP
address and port for the Syslog Server performing the accounting function.
If either Hotspot, MAC Authentication, or 802.1x EAP have been selected from within the
Authentication field, a Radius Config button is enabled (on the bottom of the screen) allowing the
user to define a Primary and Secondary Radius Accounting Server IP address, port, shared secret
password, and timeout and retry. Define these accounting settings as required for the switch.
The default Accounting Mode setting is Off .
Answer Broadcast
ESS Select this checkbox to allow the WLAN to respond to probes for broadcast ESS.
Use Voice
Prioritization Select the Use Voice Prioritization option if Voice is used on the WLAN. This gives priority
to voice packets and voice management packets and is supported only on certain legacy
Motorola Solutions VOIP phones.
Enable SVP Enabling SVP ( Spectralink Voice Prioritization ) allows the switch to identify and prioritize
traffic from Spectralink/Polycomm phones.
Secure Beacon Closed system is the secure beacon feature for not answering broadcast SSID. This option
still allows MU to MU communication within the WLAN.
QoS Weight Sets the Quality of Service weight for the WLAN. WLAN QoS will be applied based on the
QoS weight value with the higher values given priority.The default value for the weight is 1.
MU to MU Traffic Allows frames from one MU (where the destination MAC is of another MU) are switched to
a second MU. Use the drop-down menu to select one of the following options:
• Drop Packets – This restricts MU to MU communication based on the WLAN’s
configuration
• Allow Packets – This allows MU to MU communication based on the WLAN’s
configuration
MU Idle Time Set the MUs idle time limit in seconds. The default value is 1800 seconds.
Access Category Displays the Access Category for the intended traffic. The Access Categories are the different
WLAN-WMM options available to the radio.
The Access Category types are:
• Automatic/WMM – Optimized for WMM
• Voice – Optimized for voice traffic. Voice packets receive priority.
• Video – Optimized for video traffic. Video packets receive priority.
• Normal – Optimized for normal traffic
• Low – Optimized for background traffic
MCast Addr 1 The address provided takes packets (where the first 4 bytes match the first 4 bytes of the
mask) and sends them immediately over the air instead of waiting for the DTIM period. Any
multicast/broadcast that does not match this mask will go out only on DTIM Intervals.