Motorola WiNG 4.4 Page 223 Reference Manual Download

Page: 223 / 598

Network Setup 4 - 119

6. The

Neighbor Details

section allows you to select detected neighbor radios and view the following information:

4.7.9.4 Editing Smart RF Radio Settings

To edit Smart RF radio settings:

1. Select

Network

Access Port Radios

from the main menu tree.

2. Click the

Smart RF

tab

MAC Address

Displays the Media Access Control (MAC) Address of the selected AP.

AP Type

Displays the type of Access Port detected. The switches support Motorola Solutions AP 100,

AP300 and AP650 model Access Ports and AP-4131, AP-5131 and AP-7131 model

Access Points.

Radio Type

Displays the radio type of the corresponding APs.

Available types are:

• 802.11a

• 802.11an

• 802.11b

• 802.11bg

• 802.11bgn

AP Name

Displays the name assigned to the AP. The AP name can be configured on the Access Port
Radios Configuration page.

AP Location

Displays the current location for the selected AP. The location can be configured on the
Access Port Radios Configuration page.

tx/rx dbm

Displays the transmit, receive, and attenuation information of the selected neighbor radio.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands