Motorola WiNG 4.4, Reference Manual, Page: 288 / 598

5 - 8 WiNG 4.4 Switch System Reference Guide
2. Click the Add button at the bottom of the screen.
3. Enter the name of the IP pool from which IP addresses can be issued to client requests on this interface.
4. Provide the Domain name as appropriate
for the interface using the pool.
5. Enter the NetBios Node used with this particular pool. The NetBios Node could have one of the following types:
• A b-broadcast (broadcast node) uses broadcasting to query nodes on the network for the owner of a NetBIOS
name.
• A p-peer (peer-to-peer node) uses directed calls to communicate with a known NetBIOS name server, such as a
Windows Internet Name Service (WINS) server, for the IP address of a NetBIOS machine.
• An m-mixed is a mixed node that uses broadcasted queries to find a node, and failing that, queries a known p-node
name server for the address.
• An h-hybrid is a combination of two or all of the nodes mentioned above.
6. Enter the name of the boot file used for this pool within the Boot File parameter.
7. From the Network field, use the Associated Interface drop-down menu to define the switch interface is used for
the newly created DHCP configuration. Use VLAN1 as a default interface if no others have been defined.
Additionally, define the IP Address and Subnet Mask used for DHCP discovery and requests between the DHCP
Server and DHCP clients.
8. Within the Lease Time field, define one of the two kinds of leases the DHCP Server assigns to its clients:
• Infinite - If selected, the client can use the assigned address indefinitely.
NOTE: The IP address and subnet mask of the pool are required to match the addresses of
the layer 3 interface in order for the addresses to be supported through that interface.