Motorola WiNG 4.4 Reference Manual Download Page 401

Page: 401 / 598

Switch Security 6 - 49

4. Select the Syslog logging levels for each of the following log types:

ARP Log

The

ARP Log

field displays the level of Syslog logging enabled for excessive ARP on an interface.

The logging level uses standard Syslog levels of:

• Emergency

• Alert

• Critical

• Error

• Warning

• Notice

• Info

• Debug

• None

To change the logging level, click on the specific field and choose the logging level from the pull-
down menu.

Broadcast Log

The

Broadcast Log

field displays the level of syslog logging enabled for excessive broadcasts on

an interface.

The logging level uses standard Syslog levels of:

• Emergency

• Alert

• Critical

• Error

• Warning

• Notice

• Info

• Debug

• None

To change the logging level, click on the specific field and choose the logging level from the pull-
down menu.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Motorola WiNG 4.4, Reference Manual, Page: 401 / 598

Search results

Summary of Contents for WiNG 4.4

Reviews: