Motorola WiNG 4.4, Reference Manual

Page: 264 / 598

4 - 160 WiNG 4.4 Switch System Reference Guide
2. Click OK button to save and commit the new configuration.
3. Click Cancel to disregard the changes and revert back to the previous configuration.
4.10.4 Viewing and Configuring Port Instance Details
Use the Port Instance tab to view and configure MST parameters per port per instance, including Port Priority and Admin
Internal Path Cost.
To view and configure the MSTP bridge instance:
1. Select Network > Multiple Spanning Tree from the main menu tree.
Port Path Cost Port Path Cost displays the path cost for the specified port index. The default path cost depends
on the speed of the interface.
Speed Default path cost
<=100000 bits/sec 200000000
<=1000000 bits/sec 20000000
<=10000000 bits/sec 2000000
<=100000000 bits/sec 200000
<=1000000000 bits/sec 20000
<=10000000000 bits/sec 2000
<=100000000000 bits/sec 200
<=1000000000000 bits/sec 20
>1000000000000 bits/sec 2
Admin Point-to-Point
status Defines the point-to-point status as ForceTrue or ForceFalse. ForceTrue indicates this port should
be treated as connected to a point-to-point link. ForceFalse indicates this port should be treated
as having a shared connection. A port connected to a hub is on a shared link, while one connected
to a switch or workstation is a point-to-point link.
Port Enable Select this checkbox to use this port for the forwarding of packets on the switch.
Port Migration The switch can interoperate with legacy 802.1d bridges running STP / RSTP. If the port receives
a legacy 802.1D configuration BPDU, it only sends 802.1D BPDUs over its port from that point on.
Enable this option to restart detection of whether the port is connected to an MSTP capable
bridge or a legacy 802.1 bridge.
Admin Edge Port Select the checkbox to define this port as an admin edge port.