Motorola WiNG 4.4 Page 212 Reference Manual Download

Page: 212 / 598

4 - 108 WiNG 4.4 Switch System Reference Guide

3. Select a radio from the table and click the

Edit

button.

The

Select Radio/BSS

field displays the WLANs associated to each of the BSSIDs used by the radios within the radio

table. Use

Select/Change Assigned WLANs

field to edit the WLAN assignment.

4. Select any of the WLANs from the table to unassign/disable it from the list of available WLANs.

5. Refer to the

Status

field for the current state of the requests made from applet. This field displays error messages if

something goes wrong in the transaction between the applet and the switch.

6. Click the

Apply

button to save the modified WLAN assignment.

7. Click

Close

to exit the screen without committing updates to the running configuration.

4.7.4 Configuring WMM

Use the

WMM

tab to review each radio’s current index (numerical identifier), the Access Category that defines the data

type (Video, Voice, Best Effort, and Background) as well as the transmit intervals defined for the target access category.

To view existing WMM Settings:

1. Select

Network > Access Port Radios

from the main menu tree.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands