Motorola WiNG 4.4 Page 402 Reference Manual Download

Page: 402 / 598

6 - 50 WiNG 4.4 Switch System Reference Guide

5. When all logging options have been modified, click the

Apply

button to commit those changes to the switch.

6. To undo any changes and go back to the previously saved logging options, click the

Revert

button.

6.4.17 Reviewing Firewall and ACL Statistics

Use the

Statistics

tab to view set of statistics for

ACL

DHCP Snoop Entry

and

Role

based firewalls.

6.4.17.1 Reviewing ACL Statistics

To review ACL statistics:

1. Select

Security

Wireless

Firewall

from the main menu tree.

2. Click the

Statistics

tab.

Multicast Log

The

Multicast Log

field displays the level of syslog logging enabled for excessive multicast on

an interface.

The logging level uses standard Syslog levels of:

• Emergency

• Alert

• Critical

• Error

• Warning

• Notice

• Info

• Debug

• None

To change the logging level, click on the specific field and choose the logging level from the pull-
down menu.

Unknown Unicast
Log

The

Unknown Unicast Log

field displays the level of syslog logging enabled for excessive

unknown unicasts on an interface. The logging level uses standard Syslog levels of:

• Emergency

• Alert

• Critical

• Error

• Warning

• Notice

• Info

• Debug

• None

To change the logging level, click on the specific field and choose the logging level from the pull-
down menu.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands

Motorola WiNG 4.4, Reference Manual

Search results

Summary of Contents for WiNG 4.4

Reviews:

Related manuals for WiNG 4.4

Brands by name

Popular brands