Motorola WiNG 4.4, Reference Manual

Page: 245 / 598

Network Setup 4 - 141
4.9.2 Viewing Unadopted Access Ports
Use the Unadopted AP tab for gathering device hardware address and software version information for the Access Port.
To view existing Radio Configuration information:
1. Select Network > Access Port from the main menu tree.
Click the Unadopted AP tab.
The Unadopted AP tab displays the following information:
2. Select an available index and click the Adopt button to display a screen wherein the properties of a new radio can be
added for adoption to the switch. When displayed, the screen prompts for the MAC address and type of radio.
Complete the fields and click the
OK button to add the radio.
Index Displays a numerical identifier used to associate a particular Access Port with a set of
statistics and can help differentiate the Access Port from other Access Ports with similar
attributes.
MAC Address Displays the unique Hardware or Media Access Control (MAC) address for the Access Port.
Access ports with dual radios will have a unique MAC address for each radio. The MAC
address is hard-coded at the factory and cannot be modified.
Last Seen (In
Seconds) Displays the time the Access Port was last seen (observed within the switch-managed
network). This value is expressed in seconds. Use this value to assess if the Access Port is
no longer in communications with the switch.
Number of
Unadopted APs Displays the total number of Access Ports (at the bottom of the screen) that have been
recognized, but not adopted by the switch.