manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 432 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 432

6 - 80 WiNG 4.4 Switch System Reference Guide

12.If necessary, select an existing user and click the 

Delete

 

button to remove that user from the list available within the 

User Table.

6.7.4 Configuring Crypto Maps

Crypto Maps allow you to set restrictions preventing peers with specific certificates (especially certificates with particular 
DNs) from accessing selected encrypted interfaces. If restricting access, specify a fewer number of Crypto Maps (referring 
to large identity sections) instead of specifying a large number of Crypto Maps (referring to small identity sections). 

To define the Crypto Map configuration:

1. Select 

Security 

> 

IPSec VPN 

from the main menu tree.

2. Click the

 Crypto Maps 

tab.

The Crypto Maps screen is divided into 5 tabs, each serving a unique function in the overall Crypto Map configuration. 
Refer to the following:

•

Crypto Map Entries

•

Crypto Map Peers

•

Crypto Map Manual SAs

•

Crypto Map Transform Sets

•

Crypto Map Interfaces

6.7.4.1 Crypto Map Entries

To review, revise or add Crypto Map entries:

1. Select 

Security

 

>

 

IPSec VPN 

from the main menu tree.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments