Motorola WiNG 4.4, Reference Manual

Page: 247 / 598

Network Setup 4 - 143
4. To change the settings for a selected Access Port, select an Access Port from the table and click the Edit button.
5. To configure an external Syslog server on the AAP from the switch, click the Syslog Config button.
6. Click the LLDP Settings button to enable Link Layer Discovery Protocol (LLDP).
4.9.3.1 Editing Access Port Settings
To edit Access Port Settings:
1. Select Network > Access Port from the main menu tree.
2. Click the Configuration tab.
3. Select an Access Port from the table and click the Edit button
4. Configure the Country and VLAN Tagging for the selected AP:
Syslog Mode For the selected AAP, this option enables or disables logging to an external Syslog server.
LLDP Settings Enables the Link Layer Discovery Protocol (LLDP), which is a protocol that enables devices to
advertise their capabilities and media-specific configuration information.
Country Select the Country that the Access Port will be configured to operate in.
Enable VLAN
Trunking Ensure that the Enable VLAN Trunking option is selected. Trunk lines are required to pass
VLAN information between destinations. A trunk port, by default, is a member of all the
VLANs existing on the access port and carries traffic for all those VLANs. Trunking is a
function that must be enabled on both sides of a link.