manualshive.com logo in svg

Motorola WiNG 4.4, Reference Manual, Page: 385 / 598

Share
Download
Motorola WiNG 4.4 Reference Manual Download Page 385

Switch Security 6 - 33

7. Refer to the 

Status

 field for the state of the requests made from applet. This field displays error messages if something 

goes wrong in the transaction between the applet and the switch.

8. Click 

OK

 to use the changes to the running configuration and close the dialog.

9. Click 

Cancel

 to close the dialog without committing updates to the running configuration.

6.4.11 Configuring the Firewall

Configure the Firewall to create either standard/extended ip or extended MAC access control lists.

To configure the Firewall:

1. Select 

Security 

>

 

Wireless Firewall

 from the main tree menu.

2. Click the 

Configuration

 tab.

3. Click the 

ACL

 tab.

4. Add a new ACL entry as explained in 

Appendix 6.4.11.1, Adding a New ACL

.

5. The Configuration tab consists of the following two fields:

•

ACLs

 - existing access lists

•

Associated Rules 

- allow/deny rules 

 

The 

ACLs

 field displays the list of ACLs currently associated with the switch. An ACL contains an ordered list of ACEs. 

Each ACE specifies a permit or deny designation and a set of conditions the packet must satisfy to match the ACE. 
Because the switch stops testing conditions after the first match, the order of conditions in the list is critical. 

6. If an existing ACL no longer satisfies switch access control requirements, select it from amongst the existing ACLs and 

click the 

Delete

 button.

7. Use the 

Add 

button (within the ACLs field) to add an additional ACL. For more information, see 

Adding a New ACL on 

page 6-34

.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Reviews:

No comments