Motorola WiNG 4.4 Reference Manual Download Page 466

Page: 466 / 598

6 - 114 WiNG 4.4 Switch System Reference Guide

1. Select the

Delete Operations

radio button and click the

Next

button.

The next page of the wizard is used to delete a trustpoint.

2. Select and use the

Delete trustpoint and all certificates inside it

drop-down menu to define the target trustpoint

for removal.

3. Select and use the

Remove certificates from this trustpoint

drop-down menu define the trustpoint that will have

either its

Server Certificate

CA Root Certificate

removed

4. Click the

Next

button to proceed and complete the trustpoint removal.

Summary of Contents for WiNG 4.4























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for WiNG 4.4

Reviews:

Motorola WiNG 4.4, Reference Manual, Page: 466 / 598

Search results

Summary of Contents for WiNG 4.4

Reviews: